Why is my blood tracking light flickering?

If your blood tracking light is flickering, it could be due to several reasons. Here are some troubleshooting steps you can try:

### 1. **Check the Power Supply**
- **Battery Issues**: Ensure the batteries are properly inserted and have sufficient charge. Replace old batteries with new ones.
- **Power Cord**: Check if the power cord is securely connected and in good condition. Try using a different power cord if available.

### 2. **Check for Loose Connections**
- **Bulb Connections**: Ensure the bulb is securely in place and making proper contact with the socket.
- **Circuit Connections**: Check for any loose connections or wires inside the device. Tighten any loose connections.

### 3. **Inspect the Bulb**
- **Bulb Functionality**: Check if the bulb is working properly. If the bulb is burnt out or faulty, it will need to be replaced.
- **LED Bulb Sensitivity**: LED bulbs are more sensitive to voltage fluctuations. Try replacing the bulb with a new one to see if the flickering stops.

### 4. **Check for Electrical Issues**
- **Voltage Fluctuations**: Use a multimeter to check for stable voltage supply. Voltage fluctuations can cause LED bulbs to flicker.
- **Dimmer Compatibility**: If the light is connected to a dimmer switch, ensure the dimmer is compatible with LED bulbs. Some dimmers may cause flickering with certain types of bulbs.

### 5. **Clean the Device**
- **Dust and Debris**: Clean the device, especially the fans and vent holes, to ensure proper airflow and prevent overheating.
- **Circuit Board**: Clean the circuit board with a soft cloth or eraser to remove any dust or debris that might be causing electrical issues.

### 6. **Check for Damage**
- **Physical Damage**: Inspect the device for any signs of physical damage, such as cracks or dents, which might affect its functionality.
- **Internal Components**: Look for signs of heat, smoke, or burned components inside the device. Repair or replace any damaged components.

### 7. **Consult the Manual**
- **Device Manual**: Refer to the device's service manual for specific troubleshooting tips, error codes, and maintenance procedures.

### 8. **Contact Manufacturer Support**
- **Professional Help**: If none of the above steps resolve the issue, contact the manufacturer's customer support for further assistance.

By following these troubleshooting steps, you can identify and resolve common issues causing your blood tracking light to flicker. If the problem persists, it may be necessary to seek professional repair or consider replacing the device.

There Are Two Main Paths Of Blood Tracking Light Technology, One Is The Use Of Specific Wavelength Filters Can Make The Red Blood Well Highlighted, Easier To Be Detected, So As To Achieve The Purpose Of Tracking Wounded Prey;

Learn more 

The Other Is The Use Of 365nm Uv Ultraviolet Lamps, Need By Spraying Certain Chemicals Such As Luminol, Blood Will Luminesce, Or Simply “Glow In The Dark”.  

Learn more 

LEARN MORE ABOUT BLOOD TRACKING LIGHTS

http://www.bloodflashlight.com